a) Well, I have heard of filling motorcycle tanks with water and then placing in freezer. Take a big freezer for that tank though and sometimes the water expands where you do not want it to.
b) After a tank is properly purge of gas vapors, fumes and all possible residue (not easy but it is possible but takes great care and caution), I have also heard of sealing the tank openings securely such that 6-8 PSI (or maybe 10-12 PSI) of air pressure can be pumped into the tank (install tire valve in one of the sealing plugs). Heat the damaged area with a torch and let air pressure push it back out. Not too cherry red though or air pops a hole.
c) Stud gun as already mentioned (tank still needs purged of all vapors first).
d) Drill holes use traditional dent puller then reweld holes (tank still needs purged of all vapors first).
e) Weld crude patch over caved in to somewhat fill void partially and then bondo rest of way (tank still needs purged first).
f) Cut repair section out of other damaged tank that you have and then tig weld repair section into this tank (requires purging of both tanks and likely a smidge of bondo).
g) Fill current void with huge mass of Bondo (no purging required).
h) Leave it as it is.
I) Find another tank (easiest and best option)
This post was edited by rankrank1 at 19:29:05 01/11/13 5 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.