Posted by Adirondack case guy on March 06, 2013 at 17:40:08 from (74.69.160.79):
In Reply to: Re: what size Case? posted by rrlund on March 06, 2013 at 16:12:45:
Randy, You be wrong on tranny speeds. The Case 800 had a Torque Converter trans which offered infinate speed from max for each gear, to stall in each of the 8 speeds with PTO priority which matched ground speed to PTO load automacically. Torque converter output multiplied by 3.14 X from flywheel input (engine torque) to Tranny input (Converter torque output.) Didn't need to stop and shift to get through those tough spots, thus no clutching and shifting. Also there was a hyd lockup to eliminate the converter when loads were reduced. The Olie under drive was limited to two speeds in each gear. so the Case 800s were waving byby to the 880s when powering choppers, etc., on hilly ground like ours where just one gear change was not enough, in the high Rs low torque Olies. Probably why Oliver went to the over/under hydra drive, to keep up with the Cases. Smile , Loren, the Acg.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
