Posted by George Marsh on March 20, 2013 at 08:41:18 from (64.12.116.74):
My backhoe hydraulics requires I use motor oil, either 10w30 or 10w40. Change the oil and filter every 300 hours.
I don"t put 300 hours in a year and it takes 5 gallons, however I can only change 4 or the 5 gallons, one gallon of oil is in the hyd cylinders and hoses. It takes about 10 minutes for 10w40 hydraulic oil to warm up when it"s very cold, winter time.
I need to change the oil. Been using 10w40 year around. Does anyone see a problem of using a 50/50 blend of 10w30 and 10w40 year around? I will use the same brand oil, valvoline. George
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
