Posted by JD Seller on March 31, 2013 at 12:11:03 from (208.126.196.144):
In Reply to: JD 4240 posted by Bruce Bushnell on March 31, 2013 at 09:43:16:
I agree with Tx Jim that it is more than likely the hydraulic pump drive coupler. If you have caught it in time all you will need is the new isolator bushings.
Just reach in and see if you can rock the pump coupler back and forth. If you can move it at all it is bad. Just remove the clamp bolts and nusts. The two halves will come right off. I just take a sharp chisel and cut the bushing paralell to the shaft. They are just a type of plastic. If the pins have not worn the coupler halves than just install the new bushing. Then clamp the two halves of the coulper dive back together and you done.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
