Posted by ss55 on May 17, 2013 at 06:58:11 from (173.19.101.220):
In Reply to: Re: acres per hour posted by George Marsh on May 16, 2013 at 18:17:32:
George, There's nothing wrong with your calculation. 8 Acres per hour is correct for the maximum or "gross" the machine will cover when it is up and running. The difference is it is nearly impossible to keep a machine productive 100% of the time. The old timer's rule of thumb works out to about 80% effieicency or 80% utilization. So 8 Acres per hour x 0.8 utilization = 6.4 "net" acres per hour. In practice the the old timer's rule at 6.5 is reasonably close for an estimate and it is easy to remember. For a drill that may still be optimistic.
Small simple tillage equipment where you can just "drop and drive" used in long rectangular fields will have the highest utililization maybe approaching 90%. Larger equipment used in irregular shaped fields will have lower utilization.
Planting and harvesting equipment generally has the lowest utilization because they need to be periodically refilled/unloaded or to switch wagons. Also operations where a good operator neeeds to regularly stop and check how well he's doing the job, make adjustments for the conditions and then recheck after adjustment are made further reduces utilization. That downtime is time well spent, but it hurts utilization. Plannting and harvesting equipment will have lower utilizatation of 70%, 60% maybe as low as only 50% if you must refill/unload from one corner of a long field.
8 acres per hour "gross" capacity is good to used in the dealer's showroom and in the coffee shop. 6.5 is a more practice "net" capacity for planning and that may still be a bit too high for a drill.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.