I do it and understand the importance of the initial impact point having a definite effect on success of splitting the piece in the slot.
Electric motors are wound differently depending upon the usage. Some have very, very high torque as compared to engines, similarly some engines are designed for high torque. You can't compare the torque curves (not value, shape of the curves) of a BS 5 hp to a Johnny popper
Let's ask ourselves a question. GM has built diesel/electric railroad engines by the thousands for years. A single engine can pull 50 fully loaded box cars across the country with ease.
How much does the engine and 50 loaded boxcars weigh? Lots obviously.
How are you going to get all that moving? With lots of torque. Torque, defined as the twisting moment of inertia applied to an object.......prior to any movement measured in ft-lbs (US common measurement), distance of force measured in feet from point of use x weight applied from that distance measured in pounds. If/when it moves, it's HP...see below.
What has the most efficient torque for the package for the requirement? Series wound DC electric motors......apparently.
OK that's is the electrical part of the engine. What's the diesel for? Run the alternators that recharge the batteries that supply power to these high torque motors. Seems simple enough.
My personal experience is that the 5/3 rule is valid. It's all about torque. HP is nothing more than a measurement of rpm, torque, and a constant of proportionality. --------------- Butttttttttttt and a very big one at that. During the time the DC series wound motor is delivering it's torque, the armature isn't turning generating counter Electro Motive Force (CEMF). CEMF develops a back voltage which takes away from the initial voltage thus limiting the difference and the current required to operate the motor.
Result is what's called Locked Rotor Amps and can be 10x easily more than the normal (rated on the decal) running amps for the motor. So, you have to size your wiring accordingly. Since log splitting is repetitive, this 10x overload has to be factored into the wire run (size) to the motor. Engines have their advantages there.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Brief History of Tractors in Australia - by Bob Kavanagh. After Captain Cook's exploration of the east coast in 1770 the British Government decided to establish a penal colony in Australia. The first fleet arrived in 1788 and consisted mainly of convicts who were poorly equipped and new little of farming techniques. The colony remained far from self-supporting and it was not until the early 1800's that things started to improve. Free settlers started to arrive, they followed the explorers across the mountains and where land was suitable set up farms. T
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.