Posted by fixerupper on November 21, 2013 at 19:24:27 from (100.42.83.15):
In Reply to: Portable loading dock posted by Mtractor on November 21, 2013 at 18:08:06:
An old flatbed semi-trailer in the 40 foot range would allow you to have a more gradual slope on the ramp. Downfall to a longer ramp is you will have to drive careful for more feet before you're off the ramp. Truck dollies work well for adjusting ramp height and they're strong but they give a limited amount of height adjustment. If you're just wanting to vary the height a few inches dollies are the way to go. A couple of hydraulic cylinders would work too but you'll have to have a way to lock both of them before you use the ramp.
The permanent ramp at the Albert City Threshing Show has bridge beams underneath with special made high lift truck dollies for adjustment. (thanks, John) It's a real Cadillac of a ramp. The dollies are cranked with a gear reduction electric motor with top and bottom limit switches. Cranking by hand would test your stamina for the amount of range they have. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.