Posted by The tractor vet on November 22, 2013 at 17:37:18 from (75.19.119.134):
In Reply to: OT Polyurethane posted by John B. on November 22, 2013 at 17:03:36:
Id on't know if it is good or not but every inch of the trim on the down stairs in this old house is covered with it and still looks great after ten years . Myself i use it one every project . When i can work out side then i spray it on with and ELCHEAPO spray gun , aat this time of year it is foam brush applied . Normally i will put four coats on and let dry for a day then use either 220 or 320 and lightly sand it then ally two more coated . The dinning room floor was done with the floor poly and here again after 10 years even with the dogs still looks good . . If i can make it look good then it can not be all that bad . Norm Abrams i am not trust me on that.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
