Posted by ollie770 on December 15, 2013 at 18:29:22 from (166.181.80.10):
I just got a used 3 point snowblower and it needs some TLC. I want to change the oil in the gear box. If you look at the picture, there is a elbow and plug at the top (fill port). My question is about the 1/2 pipe plug on the side towards the bottom - is that the drain or the check plug? The very bottom of the gear box has nothing but the four bolts that attach it to the blower. Also is 80-90 gear oil the best the use?
Second question is the shear bolt flange that comes out of the gear box and drives the augers. Currently the hole for shear bolt is all cobbled up and sloppy. Someone has welding and tried to repair it. There is almost a 1/4 turn of slop. I am thinking easiest fix is quit using that hole and drill a new 3/8" hole on the other side of the flange?? Grade 2 or Grade 5 for the shear bolt?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
