MarkB_MI, Compare apples to apples,not apples to oranges, plug the same 220 grain from an -06 into the equation and the numbers are close again. If you don't it's like comparing fuel mileage on a Ford Fiesta against a 1/2 ton truck.
Bullet weight in grains 220 Velocity in fps 2500 Powder charge in grains 58.7 Weight of firearm in lbs 8
Recoil Impulse in (lbs sec) 3.47 Velocity of recoiling firearm (fps) 13.95 Free recoil energy in (ft/lbs) 24.17
Not a 40% increase.
Only exception I take with some on here,is telling me how BAD the recoil is and I should go down in size of caliber because they can't handle the recoil,if they shot one at all. Most are just reiterating stories told by the campfire of what someone else has said.
IF someone can't handle the recoil, I can't fault them for it,but to tell me to buy a smaller size firearm because of their vast knowledge of my capabilities is wrong,and how I won't be able to handle the recoil is wrong and I have no quandaries about saying so. Also reiterating the myth of how much more recoil the 300 over the -06 is without knowing of what they speak is wrong.They are using their human perception of recoil,not fact.
Also a side note,so far to date my 300 is open stock iron sights,no scope,so shots are as only as far as I know I can make accurately.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
