Posted by JD Seller on December 29, 2013 at 10:07:39 from (208.126.196.144):
In Reply to: JD 3010 has no power posted by mark bowgren on December 29, 2013 at 09:35:54:
Welcome to the facts of life on a JD new generation gas tractor with todays gas. I have run into some that none of us could make run "right"
Here are some things to try. I give ZERO guarantees that anything you do will make it run right.
1) Do a wet and dry compression check. See if you have low compression because of burnt valves.
2) If the compression check is alright then adjust the valves. I have seen them too tight. Then when the motor warms up the valves will not close.
3) You say you replaced the carburetor. Which one did you have and which one do you have now.
4) Check the distributor out. Even with the electronic kits the shaft bushing can be worn out and then the timing is effected.
5) Check the ignition timing. Start form scratch.
6) Adjust the governor linkage. If it is out of adjustment then it will effect everything else.
You may not get it to run right. They are real temperamental on the new formulas of gas. Running premium may help. I think it is the new blends that are the issue. The burn rate is different than the older fuels had. Had one old fellow that swore that he blended some diesel with his gas to make the burn rate slower and it helped his tractor out. I tried it and just fouled the plugs faster than they already where.
I had a gas JD 4010 on my feeder wagon for 10-15 years. When the new oxygenated fuels came out I just could not keep it running correctly. I even completely overhauled it. With good compression, several different carburetors, and electronic ignition. It still would not run right or keep from fouling plugs.
I finally solved the problem. I sold the tractor and switched to diesel.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
