Posted by Stick welding on January 21, 2014 at 21:47:31 from (96.53.210.246):
In Reply to: Re: good scare today posted by old on January 21, 2014 at 21:00:36:
Pintle hooks come in many different ratings. Gravel pups use real heavy duty pintle hooks and they all have a safety pin so they can't accidentally pop open. A lot of safety chains and their mounting points are lame on trailers and tow vehicles.
I saw the safety chain mount rip right off a trailer that was built by a well respected trailer shop. I was quite shocked though because it broke when the trailer was being moved 20' closer to the shop to go on another vehicle. The coupler wasn't latched and just as the truck stopped, the trailer popped off and rolled back about 5'. The weld on the chain mount pulled off like it was stuck on with bubble gum. A lot of good something like that is going to do you on the highway with a loaded trailer. The weight of the trailer rolling backwards about 1 MPH and the safety chain failed.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
