Posted by Zachary Hoyt on March 04, 2014 at 08:46:32 from (173.84.190.99):
I have been researching pier type foundations and am thinking of building forms to cast piers that would be 5 feet high with one foot above ground and would taper from 22x22 at the bottom to 8x8 at the top. I looked at the sonotubes with feet and various other methods, but the tapered column could be formed with willow lumber which I can produce very cheaply and which is not good for much else. Our Amish neighbors poured a tapered top like this over a round 24" footer and I talked with another neighbor who had put 55 gallon drums in the ground and filled them with concrete. I am wondering if there is a formula for finding the volume of this shape, sort of like the Washington Monument but without the pointy bit on top. Any advice will be much appreciated. I am not even sure if there is a name for this shape or not, if there is I either never learned it or have forgotten. Zach
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
