Posted by Chris Jones on March 22, 2014 at 19:42:14 from (24.148.141.137):
In Reply to: property lines posted by farmerwithmutt on March 22, 2014 at 16:17:28:
If it's like here there are pins in the ground that mark the line at corners and at critical points. While you can find them take a piece of 3" pvc pipe and drive it down a bit over/around the pin leaving it standing up 3 foot tall or so to clearly identify the property line. Leave the fence where it is but you can feel free and probably should cut/bushhog the grass on the 6 foot you own on the other side of the fence or perhaps plants some trees or something. Point being if you use the land by cutting the grass or even planting trees you are asserting your rights to it--while you aren't really telling the renter they can't use it. If you don't show any interest in it and they do over time it kinda becomes theirs--sometimes legally. There is no problem with putting up a fence 6 foot inside your line--actually it's nice to be able to have your own property on both sides so it's easy to maintain the fence.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
