Posted by Bob on April 26, 2014 at 21:36:06 from (64.255.159.192):
In Reply to: Starter Problem posted by Stephen Newell on April 26, 2014 at 13:55:18:
Most likely, the starter has failed, o rthe brushes are bad. Let me explain...
There's 2 windings in the solenoid.
One end of each is connected to the "S" terminal.
The other end of one winding is connected to the metal frame of the solenoid. This is the "hold" winding.
The opposite end of the other (HEAVY) winding is connected to the terminal that you identify as "C", and grounds through the starter windings.
This winding draws lots of current/makes lots of magnetism and "pulls in" the solenoid. At that point, when the contacts close in the solenoid and send battery power to the starter, it is no longer effective, and doesn"t need to be, as the current through the "hold" coil is adequate to keep the solenoid "pulled in".
To test your repaired "starter assembly", with a good pair of booster cables, ground the starter frame with the (-) cable, attach the (+) clamp to the terminal you have chosen to call "B", then jumper battery + to "S" and enjoy the starter operating.
If it goes NOT operate, likely the brushes are worn out (or there"s some other failure) that interrupts the path to ground of the "pull in" winding.
THIS diagram is for another brand, but is set up EXACTLY the same as your Chevy van"s starter.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
