There aren't a lot of Mitsubishi D2000's around so expertise is going to be tough to find.
It sounds like the tractor already has a hydraulic system. If so it should already have a hydraulic remote control for implements. Possibly two for running a loader attachment.
The lever for the control should be marked with a crude picture of a hydraulic cylinder, unless it is worn off. Also look around on the tractor for two sockets side-by-side, or possibly two plugged tubes side-by-side.
If you have a hydraulic remote, it is as simple as connecting the cylinder's hoses to the hydraulic outlet on the tractor, and using the existing lever to control it.
Adding a valve if your tractor doesn't have one is more complicated. You can NOT "tee" into the lines, as that will cause NONE of your hydraulics to work at all. Hydraulics have to have one path from the pump back to the reservoir in order to develop pressure. Teeing into the lines makes two paths.
You might be able to install an "open center" type hydraulic valve in-line on the pressure line coming from the pump. The flow would be pump --> new valve --> rest of tractor.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Show Coverage: Godfrey, Illinois Country Days - by Cindy Ladage. Except for last fourth of July's Old Gold show in Springfield, Illinois, I don't remember when it was so hot. Nevertheless, the heat didn't keep vendors and visitors alike from enjoying the third annual Country Day's Event. Jane Elliott said the event was originally a one man show. "Barry Seiler, owner of Country Town Farm Supply store used to invite people up to the Johne Deere store. He would give hats and a free meal for everyone that brings a tractor." Elliott said while this
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.