In my mind, this will work except that you have to remove Vehicle #1's existing battery cable because this battery post will be putting out 24V when the last connection is made. It will fry the ECM and alternator(and probably other things) if you don't remove the cable first.
I own heavy equipment and do it all the time with my pickup and two sets of jumper cables along with a spare 12V battery. I throw the spare battery up on the grill guard, hook first jumper cable negative to pickup battery neg post and other end to piece of equipment being jumped(either to frame or negative post of batteries which ultimately is grounded to the frame) then hook first jumper cable positive to pickup battery pos post and other end to spare battery neg post. With second set of jumper cables, just use the positive from the spare battery positive post and the other end to the piece of equipment being jumped(either to the pos starter terminal or the 24V pos connection at the batteries. You don't have to hook the negative side of the second set of jumper cables to anything.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.