Posted by jaimesbeam on May 24, 2014 at 10:54:22 from (76.179.148.79):
I have a Belarus 250/310 that I have to play with the starter solenoid every spring. The wiring inside mystifies me. I know how to wire the solenoid to the tractor, and how it works, but every spring I have to play around with it, and eventually I get it to work, but I'm not sure how/why.
The solenoid, which is mounted on the starter has two big electrical connection bolts. One goes to the tractor battery, the other is connected to the starter itself. Inside the solenoid one bolt has no connections and one has a wire that goes into the solenoid coil. When the solenoid coil is energized, a disk makes the connection from one bolt to the other, turning the starter motor over, and also pushing a gear to connect to the flywheel.
The only other connection is the stud which is connected to the starter switch on the dashboard. This stud has two wires which go into the solenoid coil. When the starter switch sends power to this stud, it should energize the solenoid coil connect the starter motor to the battery power, and connect the starter motor bendix gear to te flywheel.
There is of course also a ground circuit to the starter and solenoid...
The problem is that it doesn't always work. Why are there three connections to the solenoid instead of one ( plus ground)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.