Bryce, a few observations. First Delta Red's advice is good for his part of the country, but perhaps not for yours. I believe that you live where rain showers come through periodically, and almost always just a few minutes after the hay is ready to bale, LOL. If you live in rain country I would advise spending a little more time tuning. Second, in order to tune the knotters, instead of feeding enough hay for a full bale, "trip" the knotters after ten inches or so, adjust feed again and trip again, until you have the bugs worked out, so that you can go ahead and bale when the hay is ready, instead of working on it and getting the hay rained on. Third, your knotters should work well with plastic twine. When I switched over I checked with a couple of friends first, and they told me that the switch over was no problem. On the package of the plastic twine it said "works in all properly adjusted balers." I have gone back and forth between plastic and sisal a few times with no problems. Once you go through yours and clean and lubricate and check and adjust all settings, the plastic will work just as well as the sisal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.