Posted by Muduc on July 19, 2014 at 20:33:45 from (66.249.57.68):
Tonight I was getting everything ready for square baling tomorrow early afternoon and I raked everything this afternoon so I ran the square baler back and forth on the headlands to "open" the field and make sure the baler was tuned in just right. it has just enough moisture in it that its nice and green and retains all the leaves but I know those bales are going to sweat a little tomorrow and can't be stacked in the barn for a day or two. When I was younger the guys I baled for would spread salt on bales like that. My question is would hay preservative properly mixed and put in a pump up sprayer and spray the bales down as they are stacked do about the same as the old time salt trick? I have no experience with the hay preservative, and understand that it is supposed to be put on with an applicator on the baler to get it uniformly thru the bale...but my mind comes up with out of the box thinking like this from time to time and I like to bounce it off others. See what you guys think.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
