Posted by John T PS on August 25, 2014 at 05:46:00 from (216.249.72.121):
In Reply to: condensor posted by Leroy on August 24, 2014 at 19:38:24:
Leroy, heres a bit more technical info that may (or may not if too techy lol) help you understand why the condenser rating is important and its use and function in the Kettering Ignition system:
When the points are closed the coil conducts current and energy is stored in its magnetic field. Then when the points break open the coil/inductor (which opposes a sudden change in current) tends to discharge that stored energy and raises its voltage and an arc of current can jump the opening points gap which can burn and carbon the surfaces. HOWEVER the discharged condensor is sitting there in parallel like an empty electron bank willing and able to initially conduct current (until its charged) and absorb part of the stored energy SO THE POINTS ENDURE LESS ARCING AND BURNING.
However, if the condenser rating is too high there may not be a spark or very weak (but points last a longggggggggg timeeeeeeeeee) but if its open or too low she still sparks (weaker) but the points will burn up very fast. If its the correct size (to match coils inductance) there's less arcing across the points surfaces (last longer) and the transfer (electrons have a mass) of energy each way when points open and close is more balanced so you avoid a pit on one side and a build up on the other side.
I have observed very wide differences in condenser rating for different applications (because coils for different ignition systems can have a range of inductance values) similar to the range of 0.015 to 0.035 like Bob posted which is why I recommend the CORRECT rating be used (NOT 0.015 if twice that amount 0.030 is required), although YES Billy Bobs most any off the shelf unit still "works" and a spark will be there.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Uncle Cecil's Super A Lives Again - by Mike Purcell. A week or so out of most of my childhood summers was often spent with my Uncle Cecil and Aunt Sissie in the small East Texas town of Maydelle on their 80 acre farm. Some of my fondest memories of these visits are those of learning to drive a tractor at the helm of Uncle Cecil’s 1948 Farmall Super A. Uncle Cecil was the second owner of this wonderful little tractor, but it was almost as though he had adopted an infant. The original owner was a man from Minnesota who bought her from a local dea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.