Posted by John A on September 25, 2014 at 12:25:11 from (64.128.16.238):
In Reply to: Propane tanks posted by GordoSD on September 25, 2014 at 08:19:11:
Guys, Listen Up and stop B!tchin about what the supplies can/cannot do!!! If your Main tank HAS a Single Head Unit(Fill, Vapor , Bleed, Pressure relief + a liquid screw On/Off valve that has a P.O.L female opening). and screws on to a 2 or 3in vertical stub pipe Like a REGO Multi-Valve assembly like my tank has YOU ALREADY Have a Wet Line On your tank!!!!!! You will Need an Unloading Valve On one end of your hose and a regular LP On/Off valve on the other. Most unloading valves have one of two ways to Depress the Seal on the Regular Fill valve. A Screw valve to depress the seal, or a Lever with a cam that depresses the seal. With the valve mounted, the screw screws through the top! that in turn will reverse the process the Filling Process thus filling the tank you desire. When finished unscrew the valve in the center of the valve, thus to letting the seal reseat. Shut off valve on the other end of the Hose, Remember with both valves closed there is Live LP still in the hose. and between the tractor LP/BBQ tank, seal and the last valve on the Hose, Crack the hose mount of the tractor LP Tank and let the little amount of LP escape with no pressure remove the valve from the tractor LP tank replace the dust cover. and you are done. The main draw back is there is always pressure on your hose even when not in use! Hope this helps! If y'all have question Holler at me I will be glad to visit with you about. (512) 577-3837.... It isn't that difficult. just difficult to explain. Later, John A.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Uncle Cecil's Super A Lives Again - by Mike Purcell. A week or so out of most of my childhood summers was often spent with my Uncle Cecil and Aunt Sissie in the small East Texas town of Maydelle on their 80 acre farm. Some of my fondest memories of these visits are those of learning to drive a tractor at the helm of Uncle Cecil’s 1948 Farmall Super A. Uncle Cecil was the second owner of this wonderful little tractor, but it was almost as though he had adopted an infant. The original owner was a man from Minnesota who bought her from a local dea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
