Define 180 degrees out of time. Rotary injection pump on a John Deere runs at only half engine speed. If you flip it over 180 degrees it does not get 180 degrees out of time. That puts it 90 degrees out of time.
If you truly found a way to install the injection pump 180 degrees out of time - that would have the pump firing on the exhaust stroke of every cylinder. If youjust flipped the half-speed pump over and put it 90 degrees out of time - but somehow found a way to hook the correct lines to the same correct discharge ports (not really possible) - every cylinder would inject on the bottom of the power stroke and nothing would fire.
Now .. if you flip the pump over and hook the injector lines to the wrong ports -then I guess it's a crap shoot. Define what you are asking.
A pump upside down (90 degrees off) but with all the lines also reversed - i.e. . . #1 line hooked to #6 port, #5 line hooked to #2 port, #3 line hooked to #4 port, #6 line hooked to #1 port, and #2 line hooked to #5 port?? Seems to me it this would have every cyliner firing on the bottom of its exhaust stroke instead of the top of the compression stroke. Can't see how any cylinders would fire. What am I missing??
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
