Posted by Bryce Frazier on December 01, 2014 at 12:59:48 from (67.142.182.26):
Well, I drained all of the Hydro Trans stuff out, and poured 4 gal of 80-90. It is just Harvest King stuff from Big R, nothing special, but it is thick!
I fired the tractor up, and it still does the same thing, but maybe not quite as bad.. If the arms are ALL THE WAY down, and the tractor is idling, with me sitting on the lift arms, someone can hit the lift lever and go all the way up with it.
The arms will shoot up about %20 of the way correctly, and then all of a sudden they just stop, and you can feel/hear a pulsing and the arms will continue to pulse slowly to the top, and I mean SLOW...
So? Should I go ahead and pull the pump then? I really didn't want to screw up the gasket and make a huge mess before trying it with the 80-90, so, I have tried it, and here I sit!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
