Posted by white pwr on December 08, 2014 at 19:29:54 from (70.198.41.250):
We recently purchased a MFWD White 2-85 with a Cummins repower that is putting out about 115 HP. The over/under has been replaced with a straight shaft, so we just have 6 gears. We plan to use this tractor everyday on our TMR mixer to feed our cows, so only having the six gears is not a problem. We bought this tractor because it has a rebuilt front end, new clutch, Cummins with 1200 hours on it, and a new interior and seat. Its a pretty sweet little tractor.
We do have a little problem, so we think. We have never owned a white before-we are IH guys. The hydraulic pump seems to be making noise until we use one of the remotes. When we use a remote, the noise really quiets down. Also, the line that supplies the 3pt system gets pretty warm/hot. I have no clue when the hydraulic filter was changed-we bought it at a consignment auction. I plan to change all the filters, but really know nothing about these tractors. So far it works great on the mixer, and we really like this tractor, and are considering upgrading our IH1586 to a White 160 because we like this little guy so much.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
