Posted by Hendrik on December 17, 2014 at 15:40:19 from (77.171.150.157):
Question for sparkies. I have a 25 year old 3-phase asynchronous motor of 0.37 kW, driving an overhead door.
The motor is set up for star mode (not triangle). Between junction point (L1 and L2) I measure 42 Ohm, and the same value between (L1 and L3) and between (L2 and L3). Between L1 and the star point I measure 21 Ohm, and the same value for L2 and L3. So all three coils seem to be nicely identical.
I have a new motor with identical specs, although of different make. For this new motor the resistance values are 54 Ohm and 27 Ohm respectively. The new motor was bought because the old one trips the safety relay in the control box of the overhead door drive at irregular intervals.
Is the old motor bad because the Ohm values are higher? Or is the problem (tripping) somewhere else? I'm really puzzled here.
Note: I'm writing from The Netherlands where we have 230/400 V 3-phase at 50 Hz.
Any and all insight you can provide will be much appreciated. Thanks, Hendrik
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
