Posted by Bob on January 05, 2015 at 22:00:26 from (64.255.159.192):
In Reply to: Re: 1945 b farmall posted by jdc51569 on January 05, 2015 at 19:58:02:
The original seal was a WIDE double lipped seal, one lip to keep the oil in the differential/transmission, and the other lip to keep the oil in the final drive.
Typically, those old WIDE specialty seals are no longer made, so they are replaced by two narrower seals.
What you received was a "kit" of two narrow seals that replace the original (wide) seal.
Most likely, they get installed back-to back with the "garter springs" facing outward.
The two seals have a different "offset" of the sealing lip vs. the housing.
If you examine where they get installed and the construction of the old seal, you should be able to figure out the correct orientation in which to install them.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
