Posted by Steve@Advance on January 09, 2015 at 15:58:42 from (108.245.66.82):
In Reply to: cub tractor posted by richardjones on January 09, 2015 at 10:30:03:
Not familiar with your particular engine, but sounds like it has lost it's prime.
Looking at pictures of the pump, appears the gasket sets the clearance for the gear endplay. Very important, too tight the pump will gall or lock up, twist the drive off. Too loose it won't prime.
Any way to determine if the pump is turning?
Any doubt about the pick up tube and screen? Any air leaks and it will suck air and loose prime. Also if the pick up tube is empty, as in the oil is drained down into the pan, and the oil is cold and thick, the pump will have a hard time drawing oil up to the gears.
If you're sure everything is mechanically sound, pack some soft grease, vaseline, etc. into the pump. Leave the gauge disconnected from the engine for an air vent. Get some heat on the oil pan if it's cold. Start it up, bring the RPM up for a second, be ready to shut it off, see if it will shoot oil out the galley.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.