Posted by Dean on February 18, 2015 at 07:20:43 from (73.168.146.140):
In Reply to: Camaro Barn Find posted by Steve@Advance on February 17, 2015 at 20:24:56:
Nice find.
A friend of mine actually junked a 67 Z/28, using the engine and transmission in a 55 and scrapping the rest. Don't ask....
Sixty seven Z/28s were quite rare but when he did this in the early/mid 1970s, everyone wanted a 68, 69 or 70.
As previously mentioned, the 301 was a 327/350 with a 283 stroke and all of the best small block performance parts, heads, cam, intake, etc., that Chevrolet offered for production engines at the time.
They were certainly winders.
Before the 327 became readily available for hot rod use, the hot small block Chevy set up was the so-called 301, i.e., a 283 bored to 4.00". Like the 283, they too were winders but most did not have the advantage of the heads, camshafts, intakes, etc. available by the mid 1960s.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
