Well with dino oil you have breakdown that is much less with synthetics as they do a much better job of resisting high temps. Full flow oil filters of the types used in cars and mowers are about 20 microns as the smallest particle that they'll catch. And the tricky advertising of "our filter gets 99% on multiple passes" and all that hoopla is still referencing 20 microns. Read the referenced test method.
To get smaller you have to go to a bypass filtration that traps down to around 5. Since the media is very restrictive, unless you have a 5 gallon bucket sized filter (exaggeration obviously), you can't pass the 5-20 gpm of oil your engine needs for lubrication. That's how OTR trucks get long change intervals and million miles between overhauls. They have a small bypass line that goes to this filter and over time all the oil in the engine eventually goes through it.
Maybe BS has some sort of time table on a new engine, and improved dust collecting, synthetic oil specified to maintain the warranty and all and figure that you'll sell or trade the thing before the engine dies because you didn't change the oil. I know when I used to use dino oil in my mowers, I'd have to change it 2-3 times a year. With syn. I do it once.
Guess they'll let out some specifics sooner or later.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoring a John Deere 2010 Diesel Tractor - by Jim Nielsen. Following seven years working in California's Silicon Valley, my wife, baby son and I moved back to Australia to retire. We bought a small 'farm' of about 50 acres near Bendigo, in the state of Victoria. I soon found that it would be very useful to have a tractor around the place for things such as grading our long drive and brush-hogging the fields. I was also embarking on planting 1000 eucalyptus trees, and hence I would need a ripper, small disk plow, sprayer etc. to get these things accompli
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
