Posted by sapper55 on April 18, 2015 at 22:23:47 from (70.193.66.199):
Gentlemen, Two weeks ago I drove my '42 H out of my barn (after storing it for 4 months)for some bush hogging work. I filled it with fresh gas and a hot battery, and it started almost promptly. It made three good passes around the pasture and on the fourth, it started to run extremely rough. It almost ran like one of those green two cylinder things and lurch, then it finally quit completely. I tried to restart but it would only spit, sputter and slobber gas out the bottom of the carburetor. This happened one time before about 3 years ago, and it was due to a sticking needle which I replaced, and had no more problem(s). One other time it quit due to rust plugging the sediment bowl inlet. The carburetor was last rebuilt in 1995. This time I checked the float and the governor, all okay. I went ahead and cleaned and rebuilt the complete carburetor, it is really straight forward simple. It has the IHC D10 unit. The ignition is completely new and I get great spark at the plugs. I just don't understand what is going on and am at wit's end right now. It would seem to me to be an easy fix. My pasture is growing tall and I need my old workhorse. Sorry for such a long diatribe. Any ideas? I greatly appreciate the knowledge base on this forum and how you gentlemen rally around those of us in times of need. Thanks again.....Sapper
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
