Posted by 2510Paul on April 27, 2015 at 19:31:57 from (173.202.142.245):
Allen, you asked about the air ride seat I put in my 4320. As most know there is no kit for the 10 and 20 series JD's. I fabricated my own base and worked with a very helpful gentlemen at Industrial Seats to pick one that would fit. We chose a Sears 3030T Seat. It is lower but still has a 4" stroke so it will fit a little higher base above he rockshaft cover.
It has a swivel built right in. It also has the fore and aft rock that you can use or turn it off. It is fabulous.
I wired it off the accessory circuit through a relay. The relay I got through JD, it is used on the JD 4440 in many instances.
Here is another picture. I have many pictures of my fabricated base if there is interest. I could share the pros and cons of what I did and what I would do different next time. There were a lot of "fitting" decisions to make. I can also send you the contact information for the gentlemen at Industrial Seats if there is interest.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
