Thanks guys. I have let my daughter read all the responses. We have zero snow load but do have to worry about wind uplift once every few years. With this in mind we decided...........
We have agreed that the roof is flacking and as mentioned the roof rolls in the wind; so anything that bonds to the original roof may be bubbling or coming up in short order. So cool seal or peel and stick is out.
She really liked the idea of decking with osb and then putting shingles. That would cut down on the noise of living in a metal roof house. It would only cost her about $1.10 per sq ft. The only problem I have with it is putting that much weight up there. If I was confident it would hold the weight this is the option we would take. But since I am not confident the trailer would hold this much weight we would need to put in post and build a pole barn type roof over it driving the cost way up. The peek in the original roof also becomes a problem with putting in joist between the post.
So we have decided to furrow strip over the original roof and install painted steel over the strips. This will allow her to pick a color she likes; hopefully a light color that reflects the mid day sun; let the metal run a few inches long giving her a small eve; and the metal roof will now outlast the house. It could even stay up there in a move when she decides to upgrade to a real house one day.
She says to tell you guys thank you for the advise. And for the naysayers she said... Yes this may not be the best house but it cost me less than $150 a month to date; And I can come up with way more than $400 cash on a moments notice; And I am only 25 years old.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.