Posted by Steve@Advance on August 18, 2015 at 08:11:45 from (108.245.66.82):
In Reply to: New home electrical posted by SKYBOW on August 18, 2015 at 07:26:56:
Get a tester or something (a lamp) to plug into the circuit the iron is plugged into, and any other circuits you've noticed dimming. Turn off the breaker or breakers, test each outlet until you find every outlet on that circuit. Then with the breaker off, pull each receplical out and look at the wiring on the back. Chances are the wires were just pushed into the holes in back of the receptical, you'll probably find a neutral (the white wire) that's been hot. The best solution is to rewire the recepticals under the screws if they are not already wired that way.
Caution! Many times houses are wired with "shared neutrals", where one neutral serves 2 circuits. If you break the neutral, and the other breaker is still on, power will feed back through the open neutral. Best to check each neutral to the ground wire as you disconnect them just to be safe.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
