Posted by Cooter143 on November 06, 2015 at 20:29:54 from (174.125.37.138):
In Reply to: Fireplace door warped posted by Cooter143 on November 06, 2015 at 14:43:39:
No I didn't remove it, the pictures aren't doing a good job of showing the set up. That metal (insert)frame you see in the lower picture is almost flush with the mortar you see in the upper picture. I just got real close in the second one and it makes it look like it sits lower than it does. Also, in the second picture the door frame sits all the way out to the right near the stone. It is about four inches away from that insert frame. They don't come close to touching. The space in between them was filled with insulation. I'd have to cut the door down to get back in there against the insert. I'm not sure I'm doing a good job of explaining it, but the problem is nothing seats up against anything else. The door frame was just sitting out in front of the insert, before.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
