Posted by Janicholson on December 01, 2015 at 19:08:38 from (63.152.204.78):
In Reply to: Too Many Amps posted by Zilbub on December 01, 2015 at 18:47:15:
Disconnect the F terminal of the generator. If is now goes to slight discharge when running, you know the F terminal is working correctly in the generator. (not internally shorted to ground, or field to ground internally. You also now know that the regulator is not regulating correctly. This means you can try to adjust it, or just get a new one. Adjustment is done to the internal relay that has smaller contacts. It involves adjusting the tension on the spring that pulls the contacts together. Loosening this spring (a tiny bit) reduces the output. Some cheap regulators have a metal tab that must be bent. Others have a screw to turn. It must be done with a fully charged battery. The voltage should be about 7 to 7.2 volts when running 2/3 throttle. (do not mess with the other big contact relay. The cover will affect the adjustment, so putting it on for testing is a must!. Jim
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
