Posted by Billy NY on February 15, 2016 at 10:21:40 from (104.228.35.235):
In Reply to: I'm so stupid posted by notjustair on February 15, 2016 at 07:58:12:
I would definitely agree with Goose, no exception here either. Its usually better for me to take my time. Even then, its no guarantee. Sometimes figuring out a better way to do something is so obvious it does not register LOL, but often times I will think of the smarter way to work in the midst of doing something.
I bought a hydraulic splitter for the same reason, joints don't seem to like the impact/shock from heavier hammers. One thing I like about the wedge on the cylinder on my huskee/speeco made splitter, it is removable and you can use it as a press in some situations, like yours, that should be relatively safe. Only concern about that is if something was able to fly out. I could easily make plate plate/fixture for something like this, use accordingly. Travel speed of the cylinder on mine would make you be very careful with the lever, its kind of fast for this work. I saw somewhere on the web where a tow behind log splitter was built to do many other functions, a press was one of them.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Lead Substitutes - by Mike Schordine. Lead was oriinally added to gasoline as an upper cylinder lubricant. It lubes the valves and seats. If you rebuild the motor, you could use hardened seats and valves, and unleaded fuel. But if your old tractor runs good, a simple lead substitute added to the gas is a perfectly reasonable solution. And, if you are like me, your tractor is under cover, but it sits outside. So with every temperature change, the humidity in the air collects in the fuel tank, in the form of water.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.