Posted by Mike M on April 22, 2016 at 07:12:11 from (24.140.3.210):
In Reply to: frount end loader posted by itsb on April 22, 2016 at 06:25:47:
I'm thinking you will need one that starts with 500 series. My 5105 IIRC has a 520 loader on it. When buying a used loader be very careful as to what it came off of so you get all the correct brackets. Missing parts won't be cheap and anymore this stuff gets obsoleted pretty fast. A JD dealer should be able to look back in some old sales manuals and tell what you need. Is your tractor equipped with the mid mounted SCV now ? Won't be cheap but might be better off to get a complete package all new for your machine. One thing I've noticed is these tractors are so much more unstable with a loader than older tractors with loaders I have ran. Must be the short wheel base ,light weight and narrow width ? Make sure you get plenty of counter weight. Plus they lift a lot. Mine will easily lift 3000 lbs. to full height.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.