Posted by carpetfarmer on July 13, 2016 at 09:23:18 from (165.201.76.84):
In Reply to: Re: Tractor Weight posted by Paul Janke on July 13, 2016 at 08:44:02:
Right, I made sure to measure numerous times before building the mount. The picture doesn't show it well, but when the plow is angled all the way one direction or the other I believe I left about 6-8" between the moldboard and the front tires. Anyway, it's mounted as far back and I could get it and still be comfortable with the front tire clearance when the plow is angled.
That picture was taken right after I got all the framework built and mounted, so it was just kind of mocked up and not even wired or anything. Since then I have taken the old cutting edge off and built a new one with flat iron and some 2" pipe so I don't remove my gravel driveway when plowing. I also cut off the rubber flap right where the break is there at the top of the moldboard. I need to get some pictures taken and put together of everything since it's more or less completed: I like putting together portfolio's of all my fabrication projects.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Brief History of Tractors in Australia - by Bob Kavanagh. After Captain Cook's exploration of the east coast in 1770 the British Government decided to establish a penal colony in Australia. The first fleet arrived in 1788 and consisted mainly of convicts who were poorly equipped and new little of farming techniques. The colony remained far from self-supporting and it was not until the early 1800's that things started to improve. Free settlers started to arrive, they followed the explorers across the mountains and where land was suitable set up farms. T
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.