Posted by Deutz Lover on July 25, 2016 at 18:39:39 from (70.193.135.202):
In Reply to: Simms ejector pump posted by badluck13 on July 20, 2016 at 20:35:18:
I am not sure about the Simms pump on a 70 3000. I am guessing these are inline minimec pumps similar to that on my Dexta, but mechanically governed. I am thinking that you should remove the overflow lines from the injectors and see if the return flow is the same on all three injectors by turning the engine over a few times. I would also have a fire extinguisher handy as I don't know how much goes back to the tank. I would normally try this on my Dexta tractor before suggesting you do it, however I have my injectors out right now for cleaning.
If fuel was coming out of the loosened No. 1 injector tube nut when you previously loosened it and there is nothing coming out of the overflow at the top of the injector then the nozzle valve is jammed. If fuel is returning at about the same volume on all three ejector tops then the no. 1 nozzle orifices are clogged.
If this is not a good thing to try now is the time for everyone else to chime in and nix this.
I don't expect any fire, but it is always best to play it safe.
It is also possible that the number one plunger and barrel are worn out. It depends on whether the number one poppet valve is working.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.