When you pushed the pistons back into the calipers, did they go in with normal pressure, and go in straight? Did the caliper drop onto the rotor without binding? Would the wheel turn easily after reassembly?
If yes to all, there should not be anything wrong with the calipers or installation.
Try taking it for another drive, use the brakes normally. Immediately jack the wheels up and give each a turn. If they turn freely, no excess heat or hot smell, all should be well.
If they are hot, binding, crack the brake line loose at the master cylinder. If fluid comes out under pressure and the wheels free up, the master cylinder is not fully returning. (You have to do this quickly before everything cools down.) Master cylinder not returning can be caused by mechanical adjustment, the booster holding the piston in slightly, a corroded master cylinder that is binding and not returning, or worse case, oil has been used instead of brake fluid!
Did the brake job fix the shimmy? Warped rotors will only cause shimmy when the brake is applied, and you'll feel it in the pedal. If it shimmys all the time, or intermittent at different speeds, conditions, that's usually bad tires, wheel ballance, bent wheel (aftermarket wheels), or loose suspension components.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An AC Model M Crawler - by Anthony West. Neil Atkins is a man in his late thirties, a mild and patient character who talks fondly of his farming heritage. He farms around a hundred and fifty acres of arable land, in a village called Southam, located just outside Leamington Spa in Warwickshire. The soil is a rich dark brown and is well looked after. unlike some areas in the midlands it is also fairly flat, broken only by hedgerows and the occasional valley and brook. A copse of wildbreaking silver birch and oak trees surround the top si
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
