First off this is a "Howse" brand rotary cutter. Not a "Bush Hog" brand rotary cutter. You confuse people when you use others brand names as a generic name.
I am just guessing and may be wrong because you did not give us a model number. So this is like trying to find parts and give advise on a "blue" car. BUT...........
The bearing goes next to the snap ring. There is no reason to space the bearing. So if the bearing goes where you have it pictured they would have just cut the grove over there.
I must be missing something because it looks like a bearing in the housing and then you put another bearing on the shaft.
I'm thinking the bearing gets pressed into the housing cover. The shaft then gets pressed into the bearing and a snap ring goes on top to hold the shaft in. Then the gear gets pressed on with another snap ring on the bottom. This holds both the gear and bearing in place in relation to the housing cover. The backlash is adjusted by adding more gaskets/spacers where the housing cover bolts to the housing. At least that is how it works on the Howse gearbox in the picture below. It may or may not be correct because this may or may not be your model.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors, A Woman's Touch - by Teri Burkholder. I thought I would give you a little background on how I got myself hooked on tractors and their restoration. My family is a very "crafty" bunch of people. By crafty I mean good with crafts!! My Dad is a retired industrial engineer from Bucyrus Erie which made big shovels for excavating and he is also a wonderful wood worker. My mom and my "guardian angel" has had her own ceramic shop for 30 years and is an excellent painter. With these skills always active in our house it was hard not t
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
