In this order: 1) Split the 1486 and see what is clicking in the speed transmission 2) Split 1086 and put a new TA in 3) Split 1066 and put a new TA in, rebuild the shifters, put in new brakes 4)Rebuild C200 in one of the 674's (if I get to it) 5)Put the finishing touches on the Farmall 450, Oliver 66, and JD H in my shop so I can move them down the road now that I've decided I don't need to keep them, after doing mechanical restorations 6) Finish up the 656 Hydro I have been working on a mechanical restoration 7) Finish up the JD B transmission in my shop, engine is already done. Another mechanical restoration. 8) Swap the injection pump on the 460D to a newer series pump, and run it so I can see what else it may need so I can hook it to the drill next spring
9)Get the Silver Kings in the shop and get them testored!!!! Have waited too long, working on other people's stuff. Since I have not taken on any other new projects, I am getting a lot more of my own stuff done.
I know I won't get all of these completely done, but I should get a good portion of then knocked out, as long as we don't have a terribly harsh winter that causes me to work day and night every day.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.