I have had both on a 718, and the 824 on a 790. If you look at the 824, you will see another row of gathering chains below the top ones which hold the stalk. On the 722 and 822, there is only one chain per side. These heads will work fine if the crop is clean and standing well. Once the cutting discs become worn a bit, they are not as aggressive and will not cut grass or lodged corn as well. The space below the chains in the stalk way will fill with grass and cobs and plug the header so the plants will no longer enter it, but rather be cut off and fall down before the chains grab them. With the extra row of chains, the stalk way is always kept clean, even in the messiest most lodged corn....and you will experience that sooner or later. You can plug an 822 or a 722 in less than 100 feet of lodged and weedy corn, and I can assure you, that you will have a very hard time plugging a properly adjusted 824 in any crop. There is a reason why a used 824 is twice the money as a used 822.....and worth every cent. Ben
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
