I've used old chains as well as some I've bought new. RBHUNTIN is right on target! However, let me also say that with the influx of nylon straps nowdays, many people are moving away from the heavier chains. My opinion is, there's a time and a place for straps, and times when they shouldn't be used. Anyway, you can often find used chain but never just accept that it isn't damaged somewhere along its length. A bent or re-welded link, or a replacement link are all weak points, as are any areas that have rubbed and ground into the metal.
Last chain I bought was from an ACE store, I think. As long as you're buying from a reputable retailer, shouldn't be any problem to chains doing the job intended. Whether using chains or straps (or both), one thing to keep in mind is to plan for the worst - an accident. When securing a load, I was taught to secure that load as though I "expected" to be in an accident, so that it would not break away and injure or kill someone. Chains are much more resistant to damage than straps.
As for load binders, I ONLY have experience with the older-style, non-ratcheting binders. They are perfectly safe, so long as you follow a few basic guidelines
When buying chains and binders, don't get something that is rated "for your load", as even hitting a large pothole can put greatly increased stresses on your equipment. Would be best to research and learn more in-depth about chains/binders, proper ways to secure a load, etc. Have been lots of needless injuries and deaths due to people being too complacent (or bullheaded!) to do the research. You thought enough to ask. That tells me you care!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
