Posted by Leroy on April 25, 2017 at 06:13:26 from (69.88.204.212):
In Reply to: Re: 2N hydraulics posted by suplene on April 25, 2017 at 05:12:36:
Yes but you need a service manual to tell you how to find and replace as you are only working by feel. You need to be able to go by the pictures in the manual. I have both the orignal tractor books and the ITT book, early and late versions and used them all and it was while I had the top cover off that I could actually see what I needed to. And you also need to hook up the linkage by feel through that little inspection hole. A lot easier if you could have the wheel off while doing it, I could not do that. It could be bent or just gumed up and sticking and just needing a good cleaning. When I had mine down I bought a new one because mine was sticking and making the arms hang up in the up position. Looked over the old one and looked better than the new one so I cleaned up the old one and it has been working for several years. My top cover cracked I think from a booster cylinder that I have that I have never seen anouther like it and have found no one anyplace that has ever even heard of one like it let alone seen one. While I was in there I took the pump out and had it apart and cleaned everything. It could be your pump is just too wore out to build pressure but used pumps should not be hard to find.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.