Posted by kcm.MN on May 03, 2017 at 19:00:36 from (174.219.4.14):
In Reply to: Carport again posted by super99 on May 03, 2017 at 17:48:33:
Several thoughts here:
1) First of all, those don't look like they would provide adequate structural rigidity even if they were steel. You could replace them with some steel channel of the same dimension, but I would put thru-bolts with lock nuts.
2) I would also make replacement braces a bit longer than original - like maybe 6" to 10" longer in each direction - 12" to 20" overall longer braces.
3) you could take some rebar or other cheap steel and weld up a super stiff brace for each end that would follow the contour of the building. Could make the web about 6". When done, just bolt the bracing trusses to the inside of each end using adequate bolts/nuts, so as to still be able to disassemble if ever needed. This would narrow your opening height by about 4" and the width by about 8", but looks like there's still ample room to get in and out.
I don't know about there, but if we had one of those here, it'd better be anchored securely to the ground, otherwise it'll probably end up in the next county....or Canada!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.