As for a "Redneck Solution", try this on for size:
Get yourself a cap for your gas can, drill one hole in the cap just barely large enough to pull some 1/4" fuel hose through, then drill another hole through the cap and mount a tire valve assembly. On the fuel line, add an inline shutoff valve about 6" to 10" from the output end. Using a tire pump, lightly pressurize your gas can, then open the nozzle and the light pressure will push gas through the fuel line and into your tank. If your can is higher than what you're filling, then once the pressure starts the gas flowing, pop the vent cap on your gas can and it will siphon, albeit through a 1/4" hose. If your gas can is below the tank you're filling, you can continue to pump air into your gas can to push the gas out.
PLEASE NOTE!!!!!: This is a Redneck Fix ONLY, as doing this may possibly allow for a buildup of static electricity, which would not serve any good.....other than bragging rights on the Redneck forums. I honestly don't know if there is much chance of static buildup, but figured I best add that part in there. I think as long as there is some way for the can to ground out, that any chance of static buildup would be eliminated. But this also makes me wonder about the siphon nozzle on Amazon - if you set your gas can up higher, would it still be able to shed any static charge safely?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.