Posted by olgentdc on June 21, 2017 at 06:03:24 from (184.16.110.135):
In Reply to: Got a package today posted by Jon f mn on June 16, 2017 at 17:42:38:
Wonderful Jon , ConGRATULATIONS ,. bakt into a rail and bent it ? I did the same to a divider post at 6 am.,,. Yr of My divorce, i drove for a friend who had a fleet of 40 dump trux , never been to this concrete plant we were hauling sand to ,,. pulled in and saw how the other guy s were backing up a narrow steep ramp to dump in the pit, it came my turn ,and i bakt up to all the glaring lites and noise , got my tailend dead centered alrite , saw the red lite to stop . as i raised the bed , i felt a grating rub resistance , got out to chek , 6 inch well pipe was into my tailgate , and now bent a bout a foot ,. durn place was designed for 2 dumptrux at the same time,,. i lowered bed and moved over , dumpt my load , and kept it tp myself , no one ever called me out , luky me ,the tailgate barely showed a xratch ,,
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.