I have the Tekonsha P3, model #90195. It works GREAT(!!) and will work in any position. Normally I'm not one for all the electronics jazz in things, but this unit is awesome. The potential problem I find with units that have to remain fairly level is, what happens when your truck ISN'T level enough? Do you still have trailer brakes? If your model has to remain fairly level, I'd recommend getting a different model.
As for the slider on top, if you ever want or need to apply a little braking action to the trailer without engaging the truck, then you would manually use that slider. You can also use the slider to hold/lock the trailer under slippery conditions (think ice) while you finish backing up to it....assuming your wiring harness lead is long enough.
The dial underneath adjusts how much braking power is applied to the trailer brakes when you hit the truck brakes.
One more thing to consider is that some vehicles to better with one type of controller while others work better with another. These two different types are "Proportional" and "Impulse". The Impulse is also known as a "Time Delay" controller.
I was sold one for a 1996 GMC 3/4-ton Suburban and, as I didn't know the difference, I just handed them my money. I absolutely HATED how it kept surging when I'd step on the brake, but then that's how the Impulse controllers work - with "pulses" of braking action. I think these work with newer vehicles, but on the truck I drive, I gotta have Proportional - meaning if I lightly step on the brakes, I get continuously light braking action. If I hit the brakes hard, then the brakes engage hard! With the Impulse, it works TOTALLY different!
So my best advice is, make sure of what you have, AND what you need (what the vehicle prefers). Also, there is a TON of information on the eTrailer website. I'd highly recommend spending some quality time there. If you're not much for reading, they have a toll free number, and I think also a chat service from their website.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fordson Model N: Field Service Operations and Lubrication - by Anthony West. The daily or weekly servicing of any vehicle is of the utmost importance, and in days gone by when our favorite tractors were doing an important and Commercially vital job on the farm, these service operations would make a major difference to the running costs and economy of the farm. This being so, it surprises me to see how many enthusiasts attending rallies, shows etc, seem to be unaware of the importance of this constant attention. Possibly the modern machine with its 6,000 mile or even once
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
